This Harmon Kardon PA-2000 Power Amp tested at 158 RMS per side. It is one of the finest sounding power amps we've had in ages. In Xlint condition at built like a tank!!! The Caps are huge and is a well built as any power amp anywhere near this money!! Listed fairly with NO RESERVE!!
Discrete Amplifier output devices
 |
| Harmon Kardon PA-2000 |
Fanless Cooling system
Designed for long speaker cable runs
Low impedance capability
Parallel Line level outputs
Music sense auto on/off
Low voltage trigger jack
Rear panel trim pots for output level adjustment
Gold plated 5 way binding posts
 |
| Harmon Kardon PA 2000 Bridgeable Multichannel Amplifier |
TECHNICAL SPECIFICATIONS
Power Output
Normal Mode 4 x 75 watts @ 8 ohms, 20Hz – 20kHz,
Bridged Mode 2 x 160 watts @ 8 ohms, 20Hz – 20kHz,
High-Current Capability: ± 45 amps
Signal-to-Noise Ratio 110dB at rated power 45 watts
THD/IMD Less than 0.07% at rated output
Input Impedance 47K ohms
Input Sensitivity 1 volt for rated output
Remote Trigger Voltage 3 – 30 volts AC/DC
Remote Trigger Impedance 20K ohms
Dimensions (H x W x D) 6-1/8" x 17-3/8" x 15-3/4"
155mm x 442mm x 400mm
Weight 25.3 lb/11.4kg
Power Requirements 120VAC, 50Hz/60Hz
260 watts, maximum
